Skip to content

Tru-tension Chain Monkey review

For the average motorcycle rider checking and adjusting the chain tension is a job normally done themselves. I normally give mine a check over when cleaning and lubricating my chain which is normally on a weekly basis. I have been testing a Tru-tension Chain Monkey, to see how well it works.

Also available is Tru-Tensions Banana Slip chain lube

Chain wear and stretch is a weird one, there are so many factors which vary, all affecting the rate of stretch, and when the stretch occurs. The process of adjusting is also not a very hard task, but getting it to the correct tension first time, every time is also a tricky game.

Tru-tension Chain Monkey is a simple concept!

Made from a plastic moulding, with a threaded rod, plastic handle and a metal dome, it is a simple design. The kind of simple design that has you scratching your head wondering why you didn’t think of it first.

Are these the best motorcycle boots money can buy?

The first thing to do is to work out where on the Tru-tension Chain Monkey scale you sit. This accounts for the manufacturer’s recommended tension setting, and also what chain size you are using as the common 525 and 520 have different measurements. Once you work this out, you adjust a locking ring so that the monkey won’t go past this point. Working out what setting you need is tricky, but then once set its set for that bike. Multiple bikes will need multiple adjustments.

Next up you need to hang the monkey over your chain. Once done, wind the big plastic handle until the stop (that you adjusted before stops against the monkey). This pretension the chain and puts the correct amount of slack in the chain. Then the chain tension can be tightened on the rear axle blocks until tight.

BMW’s M-Endurance chain promises zero maintenance!

There is a black cap on top of the adjusting screw, does this stay on? Does this have to come off? There is nothing in the instructions, and this can affect measurements.

Once tight on the axle blocks, slacken off the monkey, wipe off any excess chain lube and put it away. By pre-tensioning it to the manufacturer’s setting the tension will be good, and correct first time around, instead of having to adjust the blocks and re-checking it each time.

Overall I don’t particularly see the need for it. Tensioning the chain isn’t the most challenging task and if you are not confident to do it, then this tool doesn’t make a difference to that. I have always done my chain tension by eye and feel, and have never had any issues.

Priced at £24.99 it is expensive, for a job you can do by eye with a ruler. I have no doubts about its durability, but the other thing that concerns me is the instructions are also a bit lacking.

For more information check out the Tru-Tension website here.

1 thought on “Tru-tension Chain Monkey review”

  1. Pingback: Tru-Tension BananaSplit Chain Lube - Ridewithpeaks

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.